LAB-243-Basics of Testing Your 12-Volt Motorcycle Battery & Charging System

Official Website: https://www.lawabidingbiker.com We explain how to easily test your motorcycle battery & charging system using a simple inexpensive digital multimeter right in your very own shop or garage. No need to go running to a dealership to spend money. Be in the know on whether you actually need a new motorcycle battery or not. Or you may find it's not the battery at all and a charging system problem instead. Here are links to the tools and items mentioned in this podcast episode Your battery may even be holding a charge, but it's the cold-cranking amps that may determine if your battery needs replacement. SUPPORT US AND SHOP IN THE OFFICIAL LAW ABIDING BIKER STORE We explain how to choose the correct settings on your multimeter & complete all the necessary tests. Set the multimeter/voltmeter to DC volts (20v range). The particular multimeter listed on this page (left) has an actual 12v setting, making it very easy. Many voltmeters might only have a 20v setting, which is the one you should choose and will work the same. Note: These multimeter settings will be used for all the below motorcycle battery and charging system tests. A must listen to Law Abiding Biker™ Podcast Episode and Article: Episode #134 (click link below) LAB-134-Harley-Davidson Alternators, Stators, Regulators, Rectifiers-Charging System | Complete Guide A must listen to Law Abiding Biker™ Podcast Episode and Article: Episode #176 (click link below) Lead Acid vs. Lithium-Ion Motorcycle Batteries Static Battery Voltage Test: Make certain you have not recently charged your motorcycle battery. Let it sit for at least an hour after disconnecting it from a charger. Turn on your ignition so your headlights are on and other accessories for about two minutes and then turn the ignition off. This is to get rid of any surface charge. CHECK OUT OUR HUNDREDS OF FREE HELPFUL VIDEOS ON OUR YOUTUBE CHANNEL AND SUBSCRIBE! Place the voltmeter leads to the battery terminals. (positive to positive and negative to negative). A good battery should read between 12.4 to 12.6 volts, 12.6v being optimal. If it reads below those values then your battery is not keeping a full charge. ==> READ MORE AND SEE OUR VIDEO HERE New Free Video Mentioned: Install a Doohickey & Torsion Spring on a Kawasaki KLR650 Sponsor-Ciro 3D CLICK HERE! Innovative products for Harley-Davidson & Goldwing Affordable chrome, lighting, and comfort products Ciro 3D has a passion for design and innovation Sponsor-RickRak CLICK HERE The Ultimate Motorcycle Luggage Rack Solution Forget those messy straps and bungee cords Go strapless with a RickRak quick attach luggage system & quality bag New Patrons: Jessica Allison of Fort Scott, KS JC Moen of Fargo, North Dakota Keoni Kaloi of Richland, WA If you appreciate the content we put out and want to make sure it keeps on coming your way then become a Patron too! There are benefits and there is no risk. Thanks to the following bikers for supporting us via a flat donation : ________________________________________________________ FURTHER INFORMATION: Official Website: http://www.LawAbidingBiker.com Email & Voicemail: http://www.LawAbidingBiker.com/Contact Podcast Hotline Phone: 509-731-3548 Facebook: https://www.facebook.com/lawabidingbiker Twitter: https://twitter.com/LawAbidingBiker